Skim Coat Level 5
Drywall Finishing Levels
Level 0: Level 0 implies that no finishing of any type has been done. The drywall is only fastened to the walls or ceiling.
Level 1: This level means that your drywall joint tape has been embedded in joint compound, and nothing more.
Level 2: This next level means that you have skimmed a thin coat of joint compound over the tape and covered the drywall screw holes. You can stop at this level if you intend to cover with tile.
Level 3: For this stage, you apply a coat of joint compound to the tape and screws. Walls that will receive a heavy texture, such as knockdown texture, can end at this level. It would be pointless to progress beyond this level, since texturing is rougher than level 3.
Level 4: This is the classic drywall finish.
Here, you apply another coat of joint compound to the tape and screws and sand the dried compound.
Level 5: The highest possible level of drywall finishing involves applying a skim coat.
In a perfect world, all drywall, every square inch of it, would be mudded and sanded down to a mirror-smooth surface. When you change some of the factors, the results change, too:
Garages: For instance, level 1 drywall finish is frequently used in garages and workshops. Why mud and sand a space that is rarely ever seen? On the other hand, a car aficionado or an obsessive tinkerer might enjoy having a workspace that is as clean and smooth as any other wall found in the residential part of the home.
Wainscot-Hidden Finishes: Putting in wainscot? Then you don't have to put a premium finish on the lower 45 inches of your walls. It will get covered up anyway.
Cabinet-Hidden Areas: Because kitchens are often blanketed with cabinets and appliances, much of the wall space doesn't need a level 5 finish. Conversely, ceilings tend to get raked by natural light through the windows, highlighting pops, bumps, and depressions. For many homeowners, nothing less than a level 5 will do on their ceilings.
Do You Ever Need a Level 5 Drywall Finish?
A level 5 finish is a skim coat of joint compound (also known as mud) applied to a finish that you would normally leave at level 4.
The two instances when you need a level 5 coating: the finish will be glossy and/or light will be coming from an angle low enough to highlight bumps and depressions.
The level 5 is like icing on the cake. It's a premium finish that you will not get by default.
At PRORAB Renovations we have highly qualified tradesmen who specialize in this department. We take the time to do it right the first time.
The best way to restore the wall surface is by skim-coating it.
Level 0: Level 0 implies that no finishing of any type has been done. The drywall is only fastened to the walls or ceiling.
Level 1: This level means that your drywall joint tape has been embedded in joint compound, and nothing more.
Level 2: This next level means that you have skimmed a thin coat of joint compound over the tape and covered the drywall screw holes. You can stop at this level if you intend to cover with tile.
Level 3: For this stage, you apply a coat of joint compound to the tape and screws. Walls that will receive a heavy texture, such as knockdown texture, can end at this level. It would be pointless to progress beyond this level, since texturing is rougher than level 3.
Level 4: This is the classic drywall finish.
Here, you apply another coat of joint compound to the tape and screws and sand the dried compound.
Level 5: The highest possible level of drywall finishing involves applying a skim coat.
In a perfect world, all drywall, every square inch of it, would be mudded and sanded down to a mirror-smooth surface. When you change some of the factors, the results change, too:
Garages: For instance, level 1 drywall finish is frequently used in garages and workshops. Why mud and sand a space that is rarely ever seen? On the other hand, a car aficionado or an obsessive tinkerer might enjoy having a workspace that is as clean and smooth as any other wall found in the residential part of the home.
Wainscot-Hidden Finishes: Putting in wainscot? Then you don't have to put a premium finish on the lower 45 inches of your walls. It will get covered up anyway.
Cabinet-Hidden Areas: Because kitchens are often blanketed with cabinets and appliances, much of the wall space doesn't need a level 5 finish. Conversely, ceilings tend to get raked by natural light through the windows, highlighting pops, bumps, and depressions. For many homeowners, nothing less than a level 5 will do on their ceilings.
Do You Ever Need a Level 5 Drywall Finish?
A level 5 finish is a skim coat of joint compound (also known as mud) applied to a finish that you would normally leave at level 4.
The two instances when you need a level 5 coating: the finish will be glossy and/or light will be coming from an angle low enough to highlight bumps and depressions.
The level 5 is like icing on the cake. It's a premium finish that you will not get by default.
At PRORAB Renovations we have highly qualified tradesmen who specialize in this department. We take the time to do it right the first time.
The best way to restore the wall surface is by skim-coating it.